NewSlicer auto-tracking → every print logs itself

Know exactly
what's on every
spool.

The free, maker-built filament tracker. Weigh, scan, and log every spool in seconds — then let a catalog of nearly 3,000 filament colors handle the rest.

100+
brands cataloged
~3,000
filament colors
$0
forever
Plays nice with everything you print
Bambu LabPrusaPolymakerSunlueSunELEGOOHatchbox
What you get

Less typing.
More printing.

Built by makers who got tired of spreadsheets, sticky notes, and digging through drawers to find that one roll of "the good translucent green." Every feature exists because someone in the forum asked for it.

Nearly 3,000 filament colors

Pick your brand and color. We've already got the diameter, recommended nozzle and bed temps, drying schedule, and empty-spool weight on file.

Bambu PLA BasicCobalt Blue215° / 55°
Polymaker PolyLiteLava215° / 60°
Prusament PLAMint215° / 60°
eSun PETGSolid Black240° / 80°

AI photo identification

Snap a label or box. Brand, material, color, and recommended settings populate themselves.

✓ Detected · 0.3s
Polymaker PolyTerra · Lava Red

Prints that log themselves

Add a one-line script to Bambu Studio, OrcaSlicer, or PrusaSlicer and every plate you slice is logged against your spools. Weigh afterwards and the real grams can replace the estimate.

Low-stock alerts

Set a threshold per spool, or a minimum number of rolls per filament. We'll surface a one-click reorder link when you're running thin.

Running low
Bambu PLA Cobalt
180g · 18% remaining
Reorder · $24.99↗

Bambu Lab, live

Connect your Bambu account and see every AMS slot — what's loaded, how full, and AMS humidity — matched to the spools in your inventory.

Add on mobile, print at the desk

Start a batch in the workshop with your phone. Photo-ID a stack of new spools, scan their boxes, or type them in. Every entry syncs to your desktop in seconds — sit down, sheet-print all the labels at once, peel and stick.

How it works

From box to dashboard
in under a minute.

1

Add

Snap a photo, scan a QR or RFID tag, or pick from the catalog. Auto-fills brand, material, color, and recommended settings.

2

Weigh

Drop the spool on the Spool Inspector — or punch in a number. Net weight is calculated against the brand's empty spool weight.

3

Track

Your slicer logs each print and the scale confirms it. Watch a chart of every gram you've extruded, and get alerted before you run out.

Hardware companion

Meet the
Spool Inspector.

A scale, camera, and RFID reader that handle the boring part of inventory. Drop a spool on — it's recognized from its tag, or you scan the code — and you're logged. No app needed.

◎
Built-in 5kg scale
Accurate to ±1g.
✦
Works with any brand
Nearly 3,000 filament colors in the catalog — and growing as the community contributes.
◌
QR scanner
Snap the label and you're logged. No keypad needed.
◈
RFID tag reading
RF models recognize a tagged spool the moment it lands — Bambu, Creality and ELEGOO factory tags included. Works alongside the camera, not instead of it.
✎
Writes its own tags
Stick a blank NFC tag on any spool and write it from the device. Generic and refill spools identify themselves too.
⊙
Set location on-device
Mark spools as shelved, in a dryer, or in any custom room — right from the Inspector.
⏻
Tracks drying time
Start a drying session from the device and the app logs how long it has been in the dryer.
↗
Wi-Fi connected
Pushes weighings straight to your dashboard.

RF (camera + RFID) $125 · camera-only $99
The code in the box adds 3 months of Pro on an assembled unit — a full year with an Inspector RF.

Spool Inspector RF — assembled black unit with the NFC wave symbol on the scale cradle and the OLED electronics box alongside
The Color Inspector: a small black 3D-printed reader with a color screen and two buttons, sitting on its swatch tray
Buy it or build it

Meet the
Color Inspector.

A pocket filament color reader: a spectral sensor and a small color screen in a 3D-printed case. Scan a swatch, a strand of filament or a printed part.

Buy one assembled for $99 — built to order, so it ships in about 1–2 weeks.

Or build it yourself, 100% free: the print files and firmware cost nothing, and you don't need a 3D Spool Tracker account. You just buy the parts.

  • Same batch or not? Compare two spools of the same color, finer than your eye can see.
  • Find spools by color Scan a sample and see the closest spools you own, including which one a part was printed with.
  • No account needed Use it on its own: the reader keeps your last 300 scans on its own web page. Add a free 3D Spool Tracker account only if you want scans saved to your spools.
  • Free print files The case, trays and reference swatches are on MakerWorld, with a step-by-step assembly guide.

Then install the firmware from your browser with the flasher. More in the Color Inspector help.

Pricing

The app is free. Pro is optional.

Free forever for the core tracker. Optional hardware and a Pro plan when you want more.

Maker
Most start here
$0forever
✓Unlimited spools & projects
✓Nearly 3,000-color filament catalog
✓AI photo identification (15/mo)
✓Slicer auto-tracking
✓One Spool Inspector
Inspector
Hardware
$99–$125one-time · camera, or camera + RFID
✓Everything in Maker, plus:
✓Spool Inspector device
✓Auto-weigh & QR scan
✓RFID tag read/write (RF model)
✓Gram-accurate print logging
✓Pro from the box code — 3 months (camera) or a year (RF)

Free vs Pro

The tracker is free forever. Pro is $5/mo — or $35/yr (just $2.92/mo) — and unlocks power features for makers who want more.

Features
Free
$0
Pro
$5/mo
or $35/yr ($2.92/mo, billed annually)
Spools, locations & projectsUnlimitedUnlimited
Print records & historyUnlimitedUnlimited
Connected printersUnlimitedUnlimited
AI vision scans (photo ID)15/moUnlimited
Spool Inspectors1Unlimited
Cost analytics
Inventory / CSV export
Full account backup (JSON)
Public REST API
Webhooks
Invoice import (PDF)
Match a print file to your spools